Fireplaces & Stove of a Woodburner Stove
Wood stoves create fire and heat through constant airflow. Fresh air is drawn into the stove via adjustable dampers, which are often located within the door of the stove. The exhaust gases are then pumped up through the chimney, and are safely removed from your home.
Modern non-catalytic wood stoves rely on secondary combustion for their efficiency. They will build up creosote, but only if they're not used properly.
Energy Efficiency
Modern woodburner stoves have been constructed to maximize efficiency in heating. The combustion process has been optimized to burn wood as efficiently as is possible. This means that a greater percentage of the fuel is converted to heat, and less goes to waste as gas or smoke.
The most important factor to consider when choosing a woodburner stove is the heating output which is measured in BTU per hour. This figure gives an idea of the amount of heat that the stove produces. It's usually an accurate indicator of its ability to efficiently heat your home.
It's important to compare wood stoves according to their combustion efficiency and heating efficiency. Combustion efficiency measures how much of the fuel is converted into useful heat, while the heating transfer efficiency is how the stove can convert the heat into warm air in your home.
Stoves equipped with catalytic combustion systems can attain high levels of combustion efficiency because the combustor burns a portion of the gases that escape during the initial combustion. This helps reduce the amount of creosote that is flammable in the chimney and cleans the exhaust gasses. Modern non-catalytic stoves may be very efficient, however they tend to burn a little hotter and have lower efficiency at low temperatures.
It is essential to keep in mind that the energy efficiency a stove can achieve depends on the quality and condition the fuel it uses. Dry and seasoned firewood is more suitable than green wood, as it contains more moisture. It is important to choose a stove that is designed for logs, since burning other kinds of combustibles can cause problems with the combustion process, resulting in excessive emissions and chimney fires.
Make sure that your stove is well insulate it, and that all doors and windows are closed tightly when not in use. It is also recommended that you have your flue vent cleaned by an expert on a regular schedule. It is also recommended to regularly clean the stove's interior. It is recommended to clean out the chimney every couple of weeks.
Clean Burning
If used properly the wood burner is the most environmentally friendly fuel option. It's a renewable resource that's largely carbon-neutral (the carbon dioxide given off during combustion is equal to the amount of carbon dioxide absorbed during the tree's lifetime).
It also avoids dependence on large energy companies, which are typically subject to price hikes, or worse, possess exclusive rights in certain areas, which leaves you open to their pricing. Additionally, you'll be able to monitor the amount of wood in your stove and purchase it as you need it.
A lot of new log burners, including the Stovax range, feature a superior combustion system that has been optimized to ensure high levels of heat efficiency and clean burn. The triple air system provides the fire with air at two different stages, allowing for quicker ignition of the top layer of logs and a more controlled flame image. It also increases thermal efficiency and reduces emission.
The best method to maximize the clean burn of a woodburner stove is make use of dried logs that have been stored and stacked for a time prior to use. These contain less moisture and so require less energy to move. Furthermore, if you stack your logs correctly and make sure they are properly seasoned prior burning, you can attain an impressive level of efficiency that can reach up to 80%.
Wood smoke contains a number of harmful pollutants, including fine particle pollution, volatile organic compounds, nitrogen oxides and benzene, which can all cause breathing problems. These pollutants are linked to respiratory and heart diseases. Modern log burners are more efficient than older models and, when combined with an air quality monitor that measures gas concentrations, they can cut the amount of gas to nearly zero.
You should check with your local authority if you are in Smoke Control Area before purchasing any type of stove. You may need a Defra-approved stove for legal use of the stove. Defra approved stoves are certified to operate under the Clean Air Act which makes it illegal to emit smoke out of chimneys in certain areas.
Low Carbon
Wood stoves are a green alternative to heating your home with fossil fuels. They reduce carbon emissions which are the main factor in global warming. Modern, energy efficient wood burners produce significantly fewer greenhouse gases and particulates than older wood burning stoves and can be used to heat your home, in addition to cooking.
To get the most benefit of your wood-burning fireplace, make sure the logs are completely dry prior to burning them. It takes time to dry wood, but it is well worth the effort. If you are able to dry your logs and have the space, you will reduce heating costs. You may also be eligible for the Renewable Heat Incentive.
Using a woodburner stove a few times per week can make a significant impact on your household's cost of energy. However, it's important to remember that it is a secondary source of heat, and is not the sole method. Use it only if absolutely needed and ensure your stove is not generating any emissions.
You can be assured that a stove that is EPA-certified will meet the low emission standards necessary to protect your health and the environment. Look for the metal tag on your wood burning stove and read the owner's manual or consult EPA's certified stove list to confirm that it is certified by EPA.
Another reason to think about an wood-burning stove that is certified by the EPA is that it will help in the preservation of habitats for forests and biodiversity. Forests play a vital role in regulating the climate of the earth. If they are managed in a sustainable manner, they are able to absorb carbon dioxide released when wood is burned. Eco-friendly stoves that only burn wood that is locally harvested and sourced sustainably, will also offer a reason to encourage sustainable forest management. This method is a reflection of the principles of the circular economy, and ensures that forests are valued for their environmental benefits, as well as for their supply of timber.
Safety
Wood stoves can create a warm and warm and cozy ambience in a room. They also make great places for family and friends to get together. They also release dangerous gases, especially when they aren't used correctly, or if the logs are of poor quality. Additionally, they may cause smokey conditions that affect indoor air quality.
Follow these simple tips to minimize the effect of your stove on your lungs. Use only dried and seasoned wood and be sure to examine the stove on a regular basis to ensure that all wood logs have a good flame. In addition, it is always recommended to use hearth pads that are designed to stand up to the constant heat of the stove as well as protecting your wooden floor from fire damage.
Another tip is to stay clear of using lighter fluid. It is a very dangerous substance that is only suitable to ignite a fire within an open fire, not in the closed wood burner. The use of this substance could result in the wood burning at a faster rate, which could result in the formation of dangerous volatile compounds that, if breathed in, could cause harm to your health.
Keep pets and children out from the wood stove when being used. Make use of a hearth mat that can be positioned underneath your stove to stop embers from falling on the floor and creating damage. It is also recommended to install carbon monoxide and smoke detectors within your home.
Additionally it is recommended that you have your chimney inspected at least once per heating season to ensure it is operating properly. A qualified professional can check the chimney to ensure that there is no creosote buildup and that it isn't leaking.
A modern wood-burning stove that has built-in control and monitoring, such as MF Fire's Catalyst intelligent wood stove, is an excellent choice for those looking for a high performance, efficient but also eco-friendly method to warm their homes. This kind of stove can eliminate the problems associated with older traditional stoves. It automatically regulates the fire to ensure that it is burning at an right level, and prevents overfiring.